Archive for the ‘OracleAppsR12’ Category
Download Patch 3636980 “Support Diagnostics (IZU) patch for AD Splice” from My Oracle Support.
Manually copy the three .txt files from the 3636980\izu\admin directory to your own temporary directory.
Rename izuterr.txt to xxerpterr.txt
and izuprod.txt to xxerpprod.txt
Open newprods.txt in a text editor.
Change from below
open xxerpprod.txt and change the references from izu to xxerp
Please use below sql for finding whether custom application id 50000 is availble or not
select decode(count ,0, 'Selected number is available', 'Selected number is already in use') Status, &&enter_custom_applID selected_number
select count(*) as count from
select 'x' from fnd_oracle_userid
where oracle_id= &&enter_custom_applID
select 'x' from fnd_application
where application_id= &&enter_custom_applID
open xxerpterr.txt and change the references from izu to xxerp
Copy the following text files to the $APPL_TOP/admin directory:
Change the current working directory to $APPL_TOP/admin
[appldev@dev-devapp1 admin]$ adsplice
Copyright (c) 2002, 2012 Oracle Corporation
Redwood Shores, California, USA
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Your default directory is '/dev/oracle/DEV/fs1/EBSapps/appl'.
Is this the correct APPL_TOP [Yes] ?
AD Splicer records your AD Splicer session in a text file
you specify. Enter your AD Splicer log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adsplice.log] :
************* Start of AD Splicer session *************
AD Splicer version: 12.2.0
AD Splicer started at: Mon Jul 11 2016 00:42:31
APPL_TOP is set to /dev/oracle/DEV/fs1/EBSapps/appl
Change DB = YES.
Please enter the name of the Oracle E-Business Suite System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
Applications System Name [DEV] : DEV *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have or want to install files used for installing or upgrading
the database in this APPL_TOP [YES] ? YES *
Do you currently have or want to install Java and HTML files for HTML-based
functionality in this APPL_TOP [YES] ? YES *
Do you currently have or want to install Oracle E-Business Suite forms files
in this APPL_TOP [YES] ? YES *
Do you currently have or want to install concurrent program files
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle E-Business Suite will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle E-Business Suite
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [AT_relebsodevapp1] : AT_relebsodevapp1 *
You are about to install or upgrade Oracle E-Business Suite product tables
in your ORACLE database 'DEV'
using ORACLE executables in '/dev/oracle/DEV/fs1/EBSapps/10.1.2'.
Is this the correct database [Yes] ?
AD Splicer needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] :
AD Splicer is verifying your username/password.
The status of various features in this run of AD Splicer is:
<-Feature version in->
Feature Active? APPLTOP Data model Flags
------------------------------ ------- -------- ----------- -----------
CHECKFILE Yes 1 1 Y N N Y N Y
PREREQ Yes 6 6 Y N N Y N Y
CONCURRENT_SESSIONS No 2 2 Y Y N Y Y N
PATCH_TIMING Yes 2 2 Y N N Y N Y
PATCH_HIST_IN_DB Yes 6 6 Y N N Y N Y
SCHEMA_SWAP Yes 1 1 Y N N Y Y Y
JAVA_WORKER Yes 1 1 Y N N Y N Y
CODELEVEL Yes 1 1 Y N N Y N Y
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following language is installed:
Code Language Status
---- --------------------------------------- ---------
US American English Base
Your base language will be AMERICAN.
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Reading database for information about how products depend on each other.
Reading topfile.txt ...
Saving product information.
*** Edition Enabled User ***
Please enter the directory where your AD Splicer control file is located.
The default directory is [/dev/oracle/DEV/fs1/EBSapps/appl/admin] :
Please enter the name of your AD Splicer control file [newprods.txt] :
Processing file /dev/oracle/DEV/fs1/EBSapps/appl/admin/newprods.txt...
Loading information for product 'xxerp'...
Warning: Because the database is in new tablespace mode, AD Splicer is ignoring the tablespace settings in your control file!
Successfully read file /dev/oracle/DEV/fs1/EBSapps/appl/admin/newprods.txt.
Validating inter-product dependency information...
Re-organizing product information lists...
Adding new languages into FND_LANGUAGES...
Creating ORACLE usernames for products...
AD Splicer is creating or updating the ORACLE username XXERP
with password ***** for XXERP CUSTOM Application tables.
New product XXERP spliced. Use FNDCPASS to change the password.
Granting privileges for tablespaces...
Granting required system privileges and creating APPS*DDL packages...
sqlplus -s XXERP/***** @/dev/oracle/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adsqlwrapper.sql '/dev/oracle/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adaddls.pls ***** XXERP *****'
Done running adaddls.pls for XXERP
sqlplus -s XXERP/***** @/dev/oracle/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adsqlwrapper.sql '/dev/oracle/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adaaddls.pls ***** XXERP *****'
Done running adaaddls.pls for XXERP
sqlplus -s XXERP/***** @/dev/oracle/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adsqlwrapper.sql '/dev/oracle/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adaddlb.pls ***** XXERP *****'
Done running adaddlb.pls for XXERP
sqlplus -s XXERP/***** @/dev/oracle/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adsqlwrapper.sql '/dev/oracle/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adaaddlb.pls ***** XXERP *****'
Done running adaaddlb.pls for XXERP
Registering ORACLE usernames/passwords.
**Inserting application information for new products...
**** Running Seed Table Prepare for FND_APPLICATION ****
**** Running Seed Table Prepare for FND_APPLICATION_TL ****
INSERT INTO FND_OAM_CONTEXT_CUSTOM (OA_VAR,CTX_TYPE,OA_TYPE,NAME,DEFAULT_VALUE,TITLE,DESCRIPTION) VALUES ('c_xxerp','A','PROD_TOP','c_xxerp','/dev/oracle/DEV/fs1/EBSapps/appl/xxerp/12.0.0','custom prod top xxerp','this is spliced custom prod top') Temporarily resetting CLASSPATH to:
Calling /dev/oracle/DEV/fs1/EBSapps/comn/util/jdk32/jre/bin/java ...
Running fnd_application_pkg.add_language ...
**Updating product information for new products...
Populating INSTALL_GROUP_NUM column to FND_ORACLE_USERID table.
**Updating product dependency information...
Recording modules in the database...done.
**Updating Data Groups...
Reading existing data groups from database.
Registering any new data groups.
Registering any new data group units.
Updating Data Group "Standard" to point to
APPS #1 Account (ORACLE ID = 900)
Updating Patch Advisor tables to include new product information ..
sqlplus -s APPS/***** @/dev/oracle/DEV/fs1/EBSapps/appl/ad/12.0.0/patch/115/sql/adsqlwrapper.sql '/dev/oracle/DEV/fs1/EBSapps/appl/ad/12.0.0/sql/adpaseed.sql *****'
Saving module actions...done.
Saving product actions...done.
Making product top directory for product "xxerp"...
Directory will be /dev/oracle/DEV/fs1/EBSapps/appl/xxerp/12.0.0
Making directory "log" for product "xxerp"...
Making directory "out" for product "xxerp"...
Making directory "mesg" for product "xxerp"...
Making directory "sql" for product "xxerp"...
Creating stub file "sql/XXERPNLINS.sql" for product "xxerp"...
Making directory "admin/sql" for product "xxerp"...
Creating stub file "admin/sql/XXERPNLADD.sql" for product "xxerp"...
Making directory "admin/driver" for product "xxerp"...
Recording ADSPLICE action for product: xxerp
Do you wish to regenerate your environment file [Yes] ? Yes
Checking if AutoConfig is enabled....
Running AutoConfig on : All products ...
Check in the backend whether custom schema is created or not.
Also check whether custom folder got created in $APPL_TOP with name xxerp.
Reset the environment using by running EBSapps.env /dev/oracle/DEV/EBSapps.env run
In this post i will list out the steps to change the webport to 8000.
Step-1:Start only Weblogic admin
using adadminsrvctl.sh start on run file system
Login to Enterprise Manager(em) Console using below url
http://<hostname > . <domainname>:7001/em
Step-2:Navigate as shown below:
Click on Advanced Configuration as shown above
Step-3:select httpd.conf from the down as show in below figure:
Change OHS Listen PORT(Here i changed to 8000)
Run Context File Synchronization $AD_TOP/bin/adSyncContext.pl :
perl $AD_TOP/bin/adSyncContext.pl contextfile=$CONTEXT_FILE
– Manually update the $CONTEXT_FILE if old port values are still present
-but in my case the values got updated to 8000
Step-6: Stop adminserver using adadminsrvctl stop
Step7: Start all the services using adstral.sh
STARTCD 188.8.131.52 has been released For R12.2 Stage
After long time I am updating my blog with R12.2.5 cloning.
There is a slight difference between R12.2.4 and R12.2.5.
With the introduction of dualfs in R12.2.5 we can even configure patch filesystem with single run of adcfgclone on the target node.
Here in the above picture, if run filesystem is on fs2 on the source then on the target also we should configure fs2 as run filesystem and automatically fs1 will become patch filesystem
we copy only EBSApps folder from source fs2 filesystem which is RUN filesystem, to target fs2 filesystem
NOTE: DO NOT COPY EBSApps folder from source fs2 run filesystem to target fs1 folder, this resulted in error.
IF FS2 FILESYSTEM IS RUN THEN WE SHOULD COPY SOURCE EBSApps FOLDER FROM FS2 of source TO TARGET FS2. THIS SHOULD BE DONE AFTER RUNNING adpreclone.pl ON SOURCE RUN FILESYSTEM.
[applcrp4@crp4app1 fs2]$ cd /d01/oracle/CRP1/fs1
[applcrp4@crp4app1 fs1]$ ls -l
drwxr-xr-x 5 applcrp4 dba 4096 Nov 6 04:49 EBSapps
[applcrp4@crp4app1 bin]$ perl adcfgclone.pl appsTier dualfs
Copyright (c) 2002, 2015 Oracle Corporation
Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone
adcfgclone Version 120.63.12020000.56
Enter the APPS password :
Enter the Weblogic AdminServer password :
Do you want to add a node (yes/no) [no] :
Running: Context clone...
Log file located at /d01/oracle/CRP1/fs2/EBSapps/comn/clone/bin/CloneContext_1116040449.log
Provide the values required for creation of the new APPL_TOP Context file.
Target System Hostname (virtual or normal) [crp4app1] :
Target System Database SID : CRP1
Target System Database Server Node [crp4app1] : crp4db1
Target System Database Domain Name [ora.ad] :
Target System Base Directory : /d01/oracle/CRP1
Target System Base Directory set to /d01/oracle/CRP1
Target System Current File System Base set to /d01/oracle/CRP1/fs2
Target System Other File System Base set to /d01/oracle/CRP1/fs1
Target System Fusion Middleware Home set to /d01/oracle/CRP1/fs2/FMW_Home
Target System Other File System Fusion Middleware Home set to /d01/oracle/CRP1/fs1/FMW_Home
Target System Web Oracle Home set to /d01/oracle/CRP1/fs2/FMW_Home/webtier
Target System Other File System Web Oracle Home set to /d01/oracle/CRP1/fs1/FMW_Home/webtier
Target System Appl TOP set to /d01/oracle/CRP1/fs2/EBSapps/appl
Target System Other File System Appl TOP set to /d01/oracle/CRP1/fs1/EBSapps/appl
Target System COMMON TOP set to /d01/oracle/CRP1/fs2/EBSapps/comn
Target System Other File System COMMON TOP set to /d01/oracle/CRP1/fs1/EBSapps/comn
Target System Instance Home Directory [/d01/oracle/CRP1] :
Target System Current File System Instance Top set to /d01/oracle/CRP1/fs2/inst/apps/d01_crp4app1
Do you want to preserve the Display [app-upg-app1:0.0] (y/n) : n
Target System Display [crp4app1:0.0] :
Target System Root Service [enabled] :
Target System Web Entry Point Services [enabled] :
Target System Web Application Services [enabled] :
Target System Batch Processing Services [enabled] :
Target System Other Services [disabled] : enabled
Do you want the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 0
Checking the port pool 0
done: Port Pool 0 is free
Report file located at /d01/oracle/CRP1/fs2/inst/apps/CRP1_crp4app1/admin/out/portpool.lst
UTL_FILE_DIR on database tier consists of the following directories.
Choose a value which will be set as APPLPTMP value on the target node  :
The new APPL_TOP context file has been created :
Check Clone Context logfile /d01/oracle/CRP1/fs2/EBSapps/comn/clone/bin/CloneContext_1116040449.log for details.
Creating Patch file system context file.....
Log file located at /d01/oracle/CRP1/fs2/EBSapps/comn/clone/bin/CloneContextPatch_1116040654.log
Target System Other File System Instance Top set to /d01/oracle/CRP1/fs1/inst/apps/CRP1_crp4app1
Target System Port Pool [0-99] : 1
Checking the port pool 1
done: Port Pool 1 is free
Report file located at /d01/oracle/CRP1/fs1/inst/apps/CRP1_crp4app1/admin/out/portpool.lst
The new APPL_TOP context file has been created :
Check Clone Context logfile /d01/oracle/CRP1/fs2/EBSapps/comn/clone/bin/CloneContextPatch_1116040654.log for details.
FMW Pre-requisite check log file location : /d01/oracle/CRP1/fs2/EBSapps/comn/clone/FMW/logs/prereqcheck.log
Running: FMW pre-req check...
Configuring: Run file system....
LogFile located at /d01/oracle/CRP1/fs2/inst/apps/CRP1_crp4app1/admin/log/clone/run/RCloneApplyAppstier_11160407.log
Configuring: Patch file system....
LogFile located at /d01/oracle/CRP1/fs2/inst/apps/CRP1_crp4app1/admin/log/clone/patch/RCloneApplyAppstier_11160433.log
Do you want to startup the Application Services for CRP1? (y/n) [n] : n
Services not started
In the proces of upgrading from R12.1.3 to R12.2.4. I encountered an issue with autoconfig on database side
Below is the excert from error log
afdbprf.sh started at Mon May 4 23:09:23 PDT 2015
The environment settings are as follows …
ORACLE_HOME : /dev/oracle/product/11.2.0
ORACLE_SID : dev
PATH : /dev/oracle/product/11.2.0/perl/bin:/dev/oracle/product/11.2.0/perl/bin:/dev/oracle/product/11.2.0/bin:/usr/bin:/usr/sbin:/dev/oracle/product/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracrp1/bin:.
Library Path : /dev/oracle/product/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/dev/oracle/product/11.2.0/lib:/usr/dt/lib:/dev/oracle/product/11.2.0/ctx/lib
Executable : /dev/oracle/product/11.2.0/bin/sqlplus
SQL*Plus: Release 184.108.40.206.0 Production on Mon May 4 23:09:23 2015
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
ERROR at line 1:
ORA-00955: name is already used by an existing object
ORA-06512: at “APPS.ADX_PRF_PKG”, line 83
ORA-01403: no data found
ORA-06512: at line 7
Disconnected from Oracle Database 11g Enterprise Edition Release 220.127.116.11.0 – 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
1. Run adadmin–>Recreate Grants and Synonyms
2. Compile Apps Schema
This has resolved the issue with autoconfig on the database side.
The WordPress.com stats helper monkeys prepared a 2014 annual report for this blog.
Here’s an excerpt:
The Louvre Museum has 8.5 million visitors per year. This blog was viewed about 240,000 times in 2014. If it were an exhibit at the Louvre Museum, it would take about 10 days for that many people to see it.
Click here to see the complete report.
Operating System: OEL 5.5.
Oracle EBS Version: R12.1.3
Oracle EBS Database Version 18.104.22.168(Before Upgrade)
Ref: Interoperability Notes EBS 12.0 or 12.1 with RDBMS 12cR1 (Doc ID 1524398.1)
Apply Below ApplicationPatches:
If you already on R12.1.3 then non need to apply Patch 9239090 – Oracle E-Business Suite 12.1.3
Apply Patch 12923944
Apply Patch 13473483
Apply Patch 16289505 – 12c Release 1 interoperability patch for Release 12.1
Apply Patch 18843706
Apply Patch 19558309
Step1:Prepare to create the 12.1.0 Oracle home
-Install Oracle Software 12c
mkdir -p /d01/oracle/PROD/db/tech_st/12c
Download below patchsets for 12c database
Unzip and run the runInstaller
Step2: Install Examples CD
Create nls/data/9idata directory
On the database server node, as the owner of the Oracle RDBMS file system and database instance, run the following command to create the $ORACLE_HOME/nls/data/9idata directory.
$ perl $ORACLE_HOME/nls/data/old/cr9idata.pl
Apply additional 22.214.171.124 RDBMS patches
Apply the following patches:
For all UNIX/Linux platforms:
Step5:Shut down Applications server processes and database listener
On each application tier server node, shut down all server processes or services. On the database tier server node, shut down the Oracle Net or Net8 database listener in the old Oracle home.
Note: The Applications will be unavailable to users until all remaining tasks in this section are completed.
Attention: Make sure that you do not have the LOCAL_LISTENER initialization parameter set to ensure that the database does not inadvertently point to a non-existent listener during upgrade.
Step6:Drop SYS.ENABLED$INDEXES (conditional)
If the SYS.ENABLED$INDEXES table exists, use SQL*Plus to connect to the database as SYSDBA and running the following command to drop it:
SQL> drop table sys.enabled$indexes;
Remove the MGDSYS schema (conditional)
If you are upgrading from an RDBMS version prior to 12c, on the old database server node, use SQL*Plus to connect to the database as SYSDBA and run the $ORACLE_HOME/md/admin/catnomgdidcode.sql script. This drops the MGDSYS schema.
$ sqlplus “/ as sysdba” @?/md/admin/catnomgdidcode.sql
Step7:Prepare to upgrade
Run FIX and Check Again…If there are any errors…….
Compile the Invalids
Copy $APPL_TOP/admin/adgrants.sql (adgrants_nt.sql for Windows) from the administration server node to the database server node. Use SQL*Plus to connect to the database as SYSDBA and run the script using the following command:
$ sqlplus “/ as sysdba” @adgrants.sql (or adgrants_nt.sql)
[APPS schema name]
Step15:De-register Database and Implement Autconfig
Run Autoconfig on the application side as well…..
Start the application tier services…..
This finishes the R12 EBS Database 126.96.36.199 to 188.8.131.52